Solar flood lights Venus series
Materials in Package
Common trouble shot
|PROBLEM||POSITION||HOW TO SOLVE|
|Light is off||Switch is off||Push on the switch|
|No direct sun||Move light to sunshine place|
|Much cloudy or rainy days||Work again when sun comes|
|Short working time||Debris on solar panel||Clean solar panel|
|Installation location||Adjust location|
|Cloudy or very rainy||Work again when sun comes|
|Battery life is expried||Replace the battery in remote|
|Remote setting is wrong||Press the longer time button|
1. Brightness level of the flood light must be set before before choosing operational times (4h, 6h or 12 hours)
2. Motion sensor option is unavailable when setting a specific lighting output (25%, 50%, 75% or 100%)
3. The two motion sensor modes are factory set and cannot be changed. Light will only turn on with 100% output or change from 30% to 100%
output when movement is detected by microwave sensor. Only the working time can be adjusted.
4. The light will blink twice when it receives the signal successfully from the remote.
5. Light can turn on with ON/OFF button both at daytime and nighttime by manual operation.
You can use it for
* Temporary Lighting
* Pathway Lighting
* Warehouse Lighting
* Refugee Tents Lighting
* Construction Site Lighting
* Bus Station Lighting
* Emergency Lighting
* Garden Lighting
* Housing Lighting
* Working Station Lighting
* Hotel Lighting
* Horse Stable Lighting
We recommend you always try to install this solar floodlight a place where the solar panel is exposed to direct sunlight in order to achieve maximum performance. The working time of the solar flood light is directly related to the solar panel's exposure to sunlight. The performance will be affected by weather and season. Under manual mode, this light can also work in the day time when the solar panel is charging the light. This function is designed to provide lighting to the places where there is never daylight, like warehouses, wine caves etc. Please do not forget to clear the solar panel after a while when it gets dirty.
|Battery capacity||6.4V 38.4WH||6.4V 76.8WH||6.4V 115WH||6.4V 154WH|
|Solar panel||10V 12W||10V 25W||10V 35W||10V 50W|
|Connection cable||5 meters totally from luminaire to solar panel|
The remote control is used to adjust the lighting power and time as you require, in summer time or your local sunshine is great all the year-round, then you can use with 75% or 100% power, otherwise, you can use 50% even 25% power to save
energy of battery, Also you can set the working time which can be last 4 hours, 6 hours 12 hours, etc. Meanwhile, the motion detection functions are available which you can use it as a security light. Function 1 is light will be off and only turn on with
100% power and last 1min when it detects movement, function 2 is light work with 100% power when there is detection from working with 30% power when no detection.
Different from PIR remote, this is a 2.4G remote is more sensititve and no need to point at the light when you use it, the distance from remote to light can be up to 10 meters in open-air area.